Port Details - ZyXEL Communications XMG1915 Series User Manual

The following table describes the labels in this screen.
Table 31 MONITOR > Port Status > Port Status
LABEL
Port
Name
Link
State
PD
LACP
TxPkts
RxPkts
Errors
Tx kB/s
Rx kB/s
Up Time
Clear the
counter

15.1.1 Port Details

Click an index in the Port column in the MONITOR > Port Status > Port Status screen to display individual
port statistics. Use this screen to check status and detailed performance data about an individual port
on the Switch.
Chapter 15 Port Status
DESCRIPTION
This identifies the Ethernet port. Click a port number to display the Port Details screen.
This is the name you assigned to this port in the PORT > Port Setup screen.
This field displays the speed (such as 100M for 100 Mbps, 1G for 1000 Mbps or 1 Gbps, or 2.5G for
2.5 Gbps) and the duplex (F for full duplex). This field displays Down if the port is not connected
to any device.
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port.
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays STOP.
When LACP (Link Aggregation Control Protocol) and STP are in blocking state, it displays
BLOCKING.
For PoE models only.
This field displays whether or not a powered device (PD) is allowed to receive power from the
Switch on this port.
This fields displays whether LACP (Link Aggregation Control Protocol) has been enabled on the
port.
This field shows the number of transmitted frames on this port.
This field shows the number of received frames on this port.
This field shows the number of received errors on this port.
This field shows the number of kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time in hours, minutes and seconds the port has been up.
Select Port, enter a port number and then click Clear Counter to erase the recorded statistical
information for that port, or select ALL Ports to clear statistics for all ports.
XMG1915 Series User's Guide
112