Ipv6 Neighbor Discovery Setup - ZyXEL Communications XMG1915 Series User Manual

Figure 99 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Global Address Setup > Add/Edit
The following table describes the labels in this screen.
Table 58 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Global Address Setup > Add/Edit
LABEL
Interface
IPv6 Global
Address
Prefix Length
EUI-64
Apply
Clear
Cancel

24.7 IPv6 Neighbor Discovery Setup

Use this screen to configure neighbor discovery settings for each interface. Click SYSTEM > IPv6 > IPv6
Neighbor Discovery > IPv6 Neighbor Discovery Setup to display the screen as shown next.
Figure 100 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Neighbor Discovery Setup
The following table describes the labels in this screen.
Table 59 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Neighbor Discovery Setup
LABEL
Index
Interface
DAD Attempts
Chapter 24 IPv6
DESCRIPTION
Select the IPv6 interface you want to configure.
Manually configure a static IPv6 global address for the interface.
Specify an IPv6 prefix length that specifies how many most significant bits (start from the left) in
the address compose the network address.
Select this option to have the interface ID be generated automatically using the EUI-64 format.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Clear to clear the fields to the factory defaults.
Click Cancel to not save the configuration you make and return to the last screen.
DESCRIPTION
This is the interface index number.
This is the name of the IPv6 interface you created.
This field displays the number of consecutive neighbor solicitations the Switch sends for this
interface.
XMG1915 Series User's Guide
146