Table of Contents
Advertisement
Ports and connectors specifications
USB ports specifications
Table 21. PowerEdge XR7620 USB ports specifications for Rear Accessed configuration
Front
USB port type
No. of ports
USB 2.0-
One
compliant port
Micro-USB 2.0-
One
compliant port for
iDRAC Direct
NOTE:
The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
NOTE:
BOSS-N1 and Internal USB are mutually exclusive.
Table 22. PowerEdge XR7620 USB ports specifications for Front Accessed configuration
USB port type
USB 2.0-compliant port
USB 3.0-compliant ports
Micro-USB 2.0-compliant
port for iDRAC Direct
NOTE:
The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
NOTE:
BOSS-N1 and Internal USB are mutually exclusive.
NIC port specifications
The PowerEdge XR7620 system supports two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on the
LAN on Motherboard (LOM) and up to four ports integrated on the Open Compute Project (OCP) cards.
Table 23. NIC port specification for the system
Feature
LOM
(Optional) OCP card (OCP 3.0)
NOTE:
On the system board, the supported OCP PCIe width is x8; when x16 PCIe width is installed, it is downgraded to x8.
Serial connector specifications
The PowerEdge XR7620 system supports one optional card type serial connector, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant .
The optional serial connector card is installed similar to an expansion card filler bracket.
USB port type
USB 2.0-
compliant port
USB 3.0-
compliant ports
Front
No. of ports
Two
One
One
Rear
No. of ports
One
One
USB port type
Internal USB 3.0
Specifications
1 Gb x 2
1GbE x 4, 10 GbE x 2, 10 GbE x 4, 25 GbE x 2 SFP28, 25 GbE
x 4 SFP28
Internal (optional)
USB port type
Internal USB 3.0
One
Internal (optional)
No. of ports
One
Technical specifications
No. of ports
35
Advertisement
Table of Contents
