Table of Contents
Advertisement
GPU specifications
The PowerEdge T560 system supports up to two 300 W double-width GPUs or six 75 W single-width GPUs .
NOTE:
Systems configured with GPUs will have higher fan acoustics.
Ports and connectors specifications
NIC port specifications
The PowerEdge T560 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on
the LAN on Motherboard (LOM) and integrated on the optional Open Compute Project (OCP) cards.
Table 18. NIC port specification for the system
Feature
LOM on Planar
OCP card
Serial connector specifications
The PowerEdge T560 system supports one optional card type serial connector, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant .
The optional serial connector card is installed similar to an expansion card filler bracket.
Ports specifications
Table 19. PowerEdge T560 port specifications
Front
Port type
No. of ports
1 x USB 2.0-
One
compliant port
1 x USB 3.0-
One
compliant port
1 x iDRAC Direct
One
(Micro-AB USB)
port
NOTE:
The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
Video specifications
The PowerEdge T560 system supports integrated Matrox G200 graphics controller with 16 MB of video frame buffer.
Specifications
2 x 1 GbE
1 x OCP x8 3.0
Rear
Port type
No. of ports
1 x Dedicated
One
iDRAC (RJ45)
port
1 x USB 2.0-
One
compliant port
1 x USB 3.0-
One
compliant port
DB-15 VGA port
One
Internal (Optional)
Port type
No. of ports
Internal USB 3.0-
One
compliant port
Technical specifications
39
Advertisement
Table of Contents
