Removing The Bezel Filter - Dell PowerEdge XR7620 Installation And Service Manual

Table of Contents

Advertisement

General guidelines
Based on network equipment environmental criteria, telecommunications industry standards, thermal management concerns,
and fiscal assessments, it is recommended air filters are to be replaced every three to six months, or within the recommended
preventive maintenance schedule.
Storing air filters for more than 6 months is not recommended. Instead, purchase cost-effective quantities and keep sufficient
inventories based on your replacement cycle. Telecom air filters have improved permanence (service life) in an operating
situation with air movement and ventilation.
NOTE:
To maintain optimal system health, Dell Technologies recommends checking and changing the filter every three
months. Filters can be ordered from Dell.

Removing the bezel filter

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the
bezel.
Steps
Press the release tab on both the sides of the bezel filer and lift the filter away from the bezel.
NOTE:
To maintain optimal system health, Dell Technologies recommends checking and changing the filter every three
months. Filters can be ordered from Dell Technologies.
Figure 37. Removing the bezel filter for Rear Accessed configuration
78
Installing and removing system components
Safety
instructions.
Before working inside your
system.

Advertisement

Table of Contents
loading

This manual is also suitable for:

E89s

Table of Contents