Table of Contents
Advertisement
2. Power off the system, and any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
Steps
1. Using a 1/4-inch flat head or a Phillips 2 screwdriver, rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
Figure 41. Removing the system cover for Rear Accessed configuration
Figure 42. Removing the system cover for Front Accessed configuration
Next steps
1.
Replace the system
cover.
Installing and removing system components
81
Advertisement
Table of Contents
