Table of Contents
Advertisement
Figure 125. Removing the M.2 BOSS card from the M.2 BOSS riser
Next steps
If applicable,
install an card into the M.2 BOSS
riser.
Installing the M2 BOSS card into the M.2 BOSS riser
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in the
Before working inside your
system.
3.
Remove the BOSS
riser.
Steps
1. Align and insert the M.2 BOSS card connector with the connectors on the M.2 BOSS riser.
2. Press the blue touch point on the M.2 BOSS card until it is firmly seated.
Installing and removing system components
153
Advertisement
Table of Contents
