Table of Contents
Advertisement
NOTE:
When installing a drive into the drive carrier, ensure that the screws are torqued to 4 lbf-in.
NOTE:
If the drive carrier has Torx screw, use Torx 6 (for 2.5-inch drive) or Torx 8 (for 3.5-inch drive) screwdriver to
install the drive.
Figure 59. Installing a drive into the drive carrier
Figure 60. Installing the E3.S drive into the drive carrier
Next steps
1.
Install the drive
carrier.
94
Installing and removing system components
Advertisement
Table of Contents
