Table of Contents
Advertisement
Steps
1. Pull and lift up the expansion card retention latch locks to open. Pull the release black latch away from the riser. Hold the
expansion card by its edges and pull the card until the card edge connector disengages from the expansion card connector
on the riser.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 107. Removing a expansion single-width Full-height GPU from expansion card riser 1
2. Pull and lift up the expansion card retention latch locks to open. Pull the release black latch away from the riser. Hold the
expansion card by its edges and pull the card until the card edge connector disengages from the expansion card connector
on the riser.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Installing and removing system components
137
Advertisement
Table of Contents
