4.9.1.4 Configuration Upload
Configuration Upload page allows the upload of the running-config and startup-config on the switch. Please refer to Figure
4-9-1-6
shown below.
If the destination is running-config, the file will be applied to the switch configuration. This can be done in two ways:
•
Replace mode: The current configuration is fully replaced with the configuration in the uploaded file.
•
Merge mode: The uploaded file is merged into
If the file system is full (i.e. contains the three system files mentioned above plus two other files), it is not possible to create new
files, but an existing file must be overwritten or another deleted first.
4.9.1.5 Configuration Activate
Thje Configure Activate page allows to activate the startup-config and default-config files present on the switch. Please refer to
Figure
4-9-1-7
shown below.
It is possible to activate any of the configuration files present on the switch, except for running-config which represents the
currently active configuration.
Select the file to activate and click
configuration with that of the selected file.
Figure 4-9-1-6: Configuration Upload Page Screenshot
running-config.
Figure 4-9-1-7: Configuration Activate Page Screenshot
. This will initiate the process of completely replacing the existing
373
User's Manual of IGS-10020HPT-U