Table of Contents
Advertisement
Command Authorization Method Configuration
The command authorization section allows you to limit the CLI commands available to a user.
The table has one row for each client type and a number of columns, which are:
Object
• Client
• Methods
• Cmd Lvl
• Cfg Cmd
Accounting Method Configuration
The accounting section allows you to configure command and exec (login) accounting.
The table has one row for each client type and a number of columns, which are:
Object
• Client
• Methods
• Cmd Lvl
• Exec
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Description
The management client for which the configuration below applies.
Method can be set to one of the following values:
•
no: Command authorization is disabled. User is granted access to CLI
commands according to his privilege level.
•
tacacs: Use remote
all remote servers are offline, the user is granted access to CLI
commands according to his privilege leve
Authorize all commands with a privilege level higher than or equal to this level.
Valid values are in the range 0 to 15.
Also authorize configuration commands
Description
The management client for which the configuration below applies.
Method can be set to one of the following values:
•
no: Accounting is disabled.
•
tacacs: Use remote
Enable accounting of all commands with a privilege level higher than or equal to
this level.
Valid values are in the range 0 to 15. Leave the field empty to disable command
accounting.
Enable exec (login) accounting.
283
User's Manual of IGS-10020HPT-U
TACACS+
server(s) for command authorization. If
TACACS+
server(s) for accounting.
Advertisement
Table of Contents
