Table of Contents
Advertisement
• TCP SYN
• TCP RST
• TCP PSH
• TCP ACK
• TCP URG
Ethernet Type Parameters
The Ethernet Type parameters can be configured when Frame Type "Ethernet Type" is selected.
Object
•
EtherType Filter
•
Ethernet Type Value
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.
■
1: TCP frames where the FIN field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Synchronize sequence numbers" (SYN) value for this ACE.
■
0: TCP frames where the SYN field is set must not be able to match this entry.
■
1: TCP frames where the SYN field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Reset the connection" (RST) value for this ACE.
■
0: TCP frames where the RST field is set must not be able to match this entry.
■
1: TCP frames where the RST field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Push Function" (PSH) value for this ACE.
■
0: TCP frames where the PSH field is set must not be able to match this entry.
■
1: TCP frames where the PSH field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
■
0: TCP frames where the ACK field is set must not be able to match this entry.
■
1: TCP frames where the ACK field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
■
0: TCP frames where the URG field is set must not be able to match this entry.
■
1: TCP frames where the URG field is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Description
Specify the Ethernet type filter for this ACE.
■
Any: No EtherType filter is specified (EtherType filter status is "don't-care").
■
Specific: If you want to filter a specific EtherType filter with this ACE, you can
enter a specific EtherType value. A field for entering a EtherType value appears.
When "Specific" is selected for the EtherType filter, you can enter a specific EtherType
value.
The allowed range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and
0x86DD(IPv6). A frame that hits this ACE matches this EtherType value.
User's Manual of IGS-10020HPT-U
324
Advertisement
Table of Contents
