4.7.1.5 Ethernet Ring Protocol Switch
This page allows the user to configure the ERPS by wizard; screen in
The page includes the following fields:
Object
• All Switch Numbers
• Number ID
• Port
• VLAN
Buttons
: Click to configure ERPS.
: Click to save changes.
: Click to show the ring topology.
Figure 4-7-1-5: Ring Wizard page screenshot
Description
Set all the switch numbers for the ring group. The default number is 3 and
maximum number is 30.
The switch where you are requesting ERPS.
Configures the port number for the MEP.
Set the ERPS VLAN.
362
User's Manual of IGS-10020HPT-U
Figure 4-7-1-5
appears.