Table of Contents
Advertisement
4.3.3.8.2 VLAN Trunking between two 802.1Q aware switches
The most cases are used for "Uplink" to other switches. VLANs are separated at different switches, but they need to access
with other switches within the same VLAN group. The screen in
Setup steps
1.
Add VLAN Group
Add two VLANs – VLAN 2 and VLAN 3
Type 1-3 in Allowed Access VLANs column, the 1-3 is including VLAN1 and 2 and 3.
2.
Assign VLAN Member and PVID for each port :
VLAN 2 : Port-1,Port-2 and Port-3
VLAN 3 : Port-4, Port-5 and Port-6
VLAN 1 : All other ports – Port-7~Port-52
Figure 4-3-3-11
Figure 4-3-3-11: VLAN Trunking Diagram
Figure 4-3-3-12: Add VLAN 2 and VLAN 3
149
User's Manual of IGS-10020HPT-U
appears.
Advertisement
Table of Contents
