Snmpv3 Access - Planet IGS-10020HPT-U User Manual

4.2.2.10 SNMPv3 Access

Configure SNMPv3 accesses table on this page. The entry index keys are Group Name, Security Model and Security Level.
The SNMPv3 Access screen in
The page includes the following fields:
Object
•
Delete
•
Group Name
•
Security Model
•
Security Level
•
Read View Name
• Write View Name
Buttons
: Click to add a new access entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-2-2-11 appears.
Figure 4-2-2-11: SNMPv3 Accesses Configuration Page Screenshot
Description
Check to delete the entry. It will be deleted during the next save.
A string identifying the group name that this entry should belong to. The allowed string length
is 1 to 32, and the allowed content is the ASCII characters from 33 to 126.
Indicates the security model that this entry should belong to. Possible security models are:

any: Accepted any security model (v1|v2c|usm).

v1: Reserved for SNMPv1.

v2c: Reserved for SNMPv2c.

usm: User-based Security Model (USM)
Indicates the security model that this entry should belong to. Possible security models are:

NoAuth, NoPriv: None authentication and none privacy.

Auth, NoPriv: Authentication and none privacy.

Auth, Priv: Authentication and privacy.
The name of the MIB view defining the MIB objects for which this request may request the
current values. The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
The name of the MIB view defining the MIB objects for which this request may potentially SET
new values. The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
User's Manual of IGS-10020HPT-U
91