Table of Contents
Advertisement
4.2.2.5 SNMP Trap Source Configuration
This page provides SNMP trap source configurations. A trap is sent for the given trap source if at least one filter with filter type
included matches the filter, and no filters with filter type excluded matches.
Click "Add New Entry" to add a new entry. The maximum entry count is 32.
The page includes the following fields:
Object
• Name
• Type
•
Subset OID
Buttons
: Click to add a new community entry. The maximum entry count is 32
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-2-2-5: SNMP Trap Source Configuration Page Screenshot
Figure 4-2-2-6: SNMP Trap Source Configuration Page Screenshot
Description
Indicates the name for the entry.
The filter type for the entry. Possible types are:
■ included: An optional flag to indicate a trap is sent for the given trap source is matched.
■ excluded: An optional flag to indicate a trap is not sent for the given trap source is matched.
The subset OID for the entry.
The value should depend on the what kind of trap name.
For example, the ifIdex is the subset OID of linkUp and linkDown. A valid subset OID is one or
more digital number(0-4294967295) or asterisk(*) which are separated by dots(.). The first
character must not begin with asterisk(*) and the maximum of OID count must not exceed 128.
User's Manual of IGS-10020HPT-U
85
Advertisement
Table of Contents
