Table of Contents
Advertisement
•
ICMP Code Value
TCP/UDP Parameters
Object
•
TCP/UDP Source Filter
•
TCP/UDP Source No.
•
TCP/UDP Source
Range
•
TCP/UDP Destination
Filter
•
TCP/UDP Destination
Number
• TCP/UDP Destination
Range
• TCP FIN
enter a specific ICMP code value. A field for entering an ICMP code value appears.
When "Specific" is selected for the ICMP code filter, you can enter a specific ICMP code
value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP code value.
Description
Specify the TCP/UDP source filter for this ACE.
■
Any: No TCP/UDP source filter is specified (TCP/UDP source filter status is
"don't-care").
■
Specific: If you want to filter a specific TCP/UDP source filter with this ACE,
you can enter a specific TCP/UDP source value. A field for entering a
TCP/UDP source value appears.
■
Range: If you want to filter a specific TCP/UDP source range filter with this
ACE, you can enter a specific TCP/UDP source range value. A field for
entering a TCP/UDP source value appears.
When "Specific" is selected for the TCP/UDP source filter, you can enter a specific
TCP/UDP source value. The allowed range is 0 to 65535. A frame that hits this ACE
matches this TCP/UDP source value.
When "Range" is selected for the TCP/UDP source filter, you can enter a specific
TCP/UDP source range value. The allowed range is 0 to 65535. A frame that hits
this ACE matches this TCP/UDP source value.
Specify the TCP/UDP destination filter for this ACE.
■
Any: No TCP/UDP destination filter is specified (TCP/UDP destination filter
status is "don't-care").
■
Specific: If you want to filter a specific TCP/UDP destination filter with this
ACE, you can enter a specific TCP/UDP destination value. A field for entering a
TCP/UDP destination value appears.
■
Range: If you want to filter a specific range TCP/UDP destination filter with this
ACE, you can enter a specific TCP/UDP destination range value. A field for
entering a TCP/UDP destination value appears.
When "Specific" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination value. The allowed range is 0 to 65535. A frame that
hits this ACE matches this TCP/UDP destination value.
When "Range" is selected for the TCP/UDP destination filter, you can enter a specific
TCP/UDP destination range value. The allowed range is 0 to 65535. A frame that
hits this ACE matches this TCP/UDP destination value.
Specify the TCP "No more data from sender" (FIN) value for this ACE.
■
0: TCP frames where the FIN field is set must not be able to match this entry.
User's Manual of IGS-10020HPT-U
323
Advertisement
Table of Contents
