Table of Contents
Advertisement
The page includes the following fields:
Object
•
Port
•
LACP Enabled
•
Key
•
Role
• Timeout
•
Priority
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-3-2-5 : LACP Port Configuration Page Screenshot
Description
The switch port number.
Controls whether LACP is enabled on this switch port. LACP will form an aggregation when 2
or more ports are connected to the same partner.
The Key value incurred by the port, range 1-65535 . The Auto setting will set the key as
appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific
setting, a user-defined value can be entered. Ports with the same Key value can participate in
the same aggregation group, while ports with different keys cannot.
The default setting is "Auto"
The Role shows the LACP activity status. The Active will transmit LACP packets each second,
while Passive will wait for a LACP packet from a partner (speak if spoken to).
The Timeout controls the period between BPDU transmissions. Fast will transmit LACP
packets each second, while Slow will wait for 30 seconds before sending a LACP packet.
The Priority controls the priority of the port. If the LACP partner wants to form a larger group
than is supported by this device then this parameter will control which ports will be active and
which ports will be in a backup role. Lower number means greater priority.
User's Manual of IGS-10020HPT-U
126
Advertisement
Table of Contents
