Table of Contents
Advertisement
• Power
Allocation
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.6.1.5 PoE Status
This page allows the user to inspect the total power consumption, total power reserved and current status for all PoE ports. The
screen in
Figure 4-6-1-4
appears.
this case, the port with the lowest priority will be turned off, and power for the port of higher
priority will be offered.
It can limit the port PoE supply wattage. Per port maximum value must be less than 36W
watts; total ports values must be less than the Power Reservation value. Once power
overload is detected, the port will automatically shut down and continue to be in detection
mode until Pad's power consumption is lower than the power limit value.
Figure 4-6-1-4:PoE Status Screenshot
User's Manual of IGS-10020HPT-U
344
Advertisement
Table of Contents
