Table of Contents
Advertisement
4.3.5 VLAN Translation Mappings
This page allows you to create mappings of VLANs -> Translated VLANs and organize these mappings into global Groups. The
VLAN Translation Mapping Table screen in
The page includes the following fields:
Object
• Group ID
• Direction
• VLAN ID
• TVID
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to cancel the setting.
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
Figure 4-3-3-21
Figure 4-3-3-21: VLAN Translation Mapping Table Page Screenshot
Description
The VLAN Translation mappings are organized into Groups, identified by the Group ID. This
way a port is configured to use a number of VLAN Translation mappings easily by simply
configuring it to use a given group. Then number of possible groups in a switch is equal to
the number of ports present in this switch. A port can be configured to use any of the groups,
but only one at any given time. Multiple ports can be configured to use the same group. A
valid Group ID is an integer value from 1 to 24.
Note: By default, each port is set to use the group with Group ID equal to the port number.
For example, port #1 is by default set to use group with GID = 1.
Indicates the direction of the VLAN Translation and it refers to the switch. The direction can
be 'Ingress', where the translation takes place on the VLAN ID of frames entering the switch
port, 'Egress', where the translation takes place on the VLAN ID of frames exiting the switch
port, or 'Both', where the translation takes place on both of the above directions.
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from 1-4095.
Indicates the translated VLAN ID to which a VLAN ID of a frame will be translated to. A valid
translated VLAN ID ranges from 1 to 4095.
User's Manual of IGS-10020HPT-U
appears.
158
Advertisement
Table of Contents
