Table of Contents
Advertisement
• VLAN ID
• L2 Priority
• DSCP
• Adding a new policy
Port Policies Configuration
Every port may advertise a unique set of network policies or different attributes for the same network policies, based on the
authenticated user identity or port configuration.
Object
• Port
• Policy ID
Buttons
: Click to apply changes
:
Click to undo any changes made locally and revert to previously saved values.
VLAN identifier (VID) for the port as defined in IEEE 802.1Q-2003
L2 Priority is the Layer 2 priority to be used for the specified application type. L2 Priority
may specify one of eight priority levels (0 through 7), as defined by IEEE 802.1D-2004. A
value of 0 represents use of the default priority as defined in IEEE 802.1D-2004.
DSCP value to be used to provide Diffserv node behavior for the specified application type
as defined in IETF RFC 2474. DSCP may contain one of 64 code point values (0 through
63). A value of 0 represents use of the default DSCP value as defined in RFC 2475.
Click
VLAN ID, L2 Priority and DSCP for the new policy. Click "Save".
The number of policies supported is 32
Description
The port number for which the configuration applies.
The set of policies that shall apply for a given port. The set of policies is selected by
checkmarking the checkboxes that corresponds to the policies
User's Manual of IGS-10020HPT-U
to add a new policy. Specify the Application type, Tag,
214
Advertisement
Table of Contents
