Configuration Download; Configuration Upload - Planet GS-5220-24T4XVR User Manual

4.7.3 Configuration Download

The switch stores its configuration in a number of text files in CLI format. The files are either virtual (RAM-based) or stored in
flash on the switch.
There are three system files:

running-config: A virtual file that represents the currently active configuration on the switch. This file is volatile.

startup-config: The startup configuration for the switch, read at boot time.

default-config: A read-only file with vendor-specific configuration. This file is read when the system is restored to default
settings.
It is also possible to store up to two other files and apply them to running-config, thereby switching configuration.
Configuration Download page allows the download the running-config, startup-config and default-config on the switch. Please
refer to the Figure 4-7-3-1

4.7.4 Configuration Upload

Configuration Upload page allows the upload the running-config and startup-config on the switch. Please refer to the Figure
4-7-4-1 shown below.
Figure 4-7-2-2: Finish Saving Page Screenshot
shown below.
Figure 4-7-3-1: Configuration Download Page Screenshot
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
333