Table of Contents
Advertisement
4.3.16.3 Event Status
This page allows the user to inspect the current Link OAM Link Event configurations, and change them as well. as screen in
Figure 4-3-16-3
appears.
The page includes the following fields:
General Settings
Object
• Port
• Sequence Number
• Frame Error Event
Timestamp
• Frame error event
window
• Frame error event
threshold
• Frame errors
Figure 4-3-16-3: Link OAM Statistic Page Screenshot
Description
The switch port number.
This two-octet field indicates the total number of events occurred at the remote end.
This two-octet field indicates the time reference when the event was generated, in
terms of 100 ms intervals.
This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1)
The default value is one second. 2) The lower bound is one second. 3) The upper
bound is one minute.
This four-octet field indicates the number of detected errored frames in the period is
required to be equal to or greater than in order for the event to be generated. 1) The
default value is one frame error. 2) The lower bound is zero frame errors. 3) The
upper bound is unspecified.
This four-octet field indicates the number of detected errored frames in the period.
239
User's Manual of IGS-10020HPT-U
Advertisement
Table of Contents
