Planet IGS-10020HPT-U User Manual page 294

• Other Info
Tx Retransmissions
Tx Pending
Requests
Tx Timeouts
This section contains information about the state of the server and the latest round-trip
time.
Name RFC4670 Name
IP Address -
State -
294
User's Manual of IGS-10020HPT-U
radiusAccClientExt The number of RADIUS
Retransmissions packets retransmitted to the
RADIUS accounting server.
radiusAccClientExt The number of RADIUS
PendingRequests packets destined for the server
that have not yet timed out or
received a response. This
variable is incremented when
a Request is sent and
decremented due to receipt of
a Response, timeout, or
retransmission.
radiusAccClientExt The number of accounting
Timeouts timeouts to the server. After a
timeout, the client may retry to
the same server, send to a
different server, or give up. A
retry to the same server is
counted as a retransmit as
well as a timeout. A send to a
different server is counted as a
Request as well as a timeout.
Description
IP address and UDP port for the accounting
server in question.
Shows the state of the server. It takes one of
the following values:

Disabled: The selected server is disabled.

Not Ready: The server is enabled, but IP
communication is not yet up and running.

Ready: The server is enabled, IP
communication is up and running, and the
RADIUS module is ready to accept
accounting attempts.

Dead (X seconds left): Accounting