Table of Contents
Advertisement
•
SMAC Value
•
DMAC Filter
•
DMAC Value
VLAN Parameters
Object
• 802.1Q Tagged
•
VLAN ID Filter
•
VLAN ID
•
Tag Priority
ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object
•
ARP/RARP
When "Specific" is selected for the SMAC filter, you can enter a specific source MAC
address. The legal format is "xx-xx-xx-xx-xx-xx" or "xx.xx.xx.xx.xx.xx" or
"xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches this
SMAC value.
Specify the destination MAC filter for this ACE.
■
Any: No DMAC filter is specified. (DMAC filter status is "don't-care".)
■
MC: Frame must be multicast.
■
BC: Frame must be broadcast.
■
UC: Frame must be unicast.
■
Specific: If you want to filter a specific destination MAC address with this
ACE, choose this value. A field for entering a DMAC value appears.
When "Specific" is selected for the DMAC filter, you can enter a specific destination
MAC address. The legal format is "xx-xx-xx-xx-xx-xx" or "xx.xx.xx.xx.xx.xx" or
"xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches this
DMAC value.
Description
Specify whether frames can hit the action according to the 802.1Q tagged. The allowed
values are:
Any: Any value is allowed ("don't-care").
Enabled: Tagged frame only.
Disabled: Untagged frame only.
The default value is "Any".
Specify the VLAN ID filter for this ACE.
■
Any: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
■
Specific: If you want to filter a specific VLAN ID with this ACE, choose this
value. A field for entering a VLAN ID number appears.
When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN ID number.
The allowed range is 1 to 4095. A frame that hits this ACE matches this VLAN ID value.
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag priority. The
allowed number range is 0 to 7. The value Any means that no tag priority is specified (tag
priority is "don't-care".)
Description
Specify the available ARP/RARP opcode (OP) flag for this ACE.
■
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
■
ARP: Frame must have ARP/RARP opcode set to ARP.
User's Manual of IGS-10020HPT-U
318
Advertisement
Table of Contents
