Vlan Trunking Between Two 802.1Q Aware Switches - Planet GS-5220-16S8C User Manual

Figure 4-6-10: Change Port VLAN of Port 1~3 to be VLAN2 and Port VLAN of Port 4~6 to be VLAN3
3. Enable VLAN Tag for specific ports
Link Type: Port-3 (VLAN-2) and Port-6 (VLAN-3)
Change Port 3 Mode as Trunk, Selects Egress Tagging as Tag All and Types 2 in the Allowed VLANs column.
Change Port 6 Mode as Trunk and Selects Egress Tagging as Tag All and Types 3 in the Allowed VLANs column.
The Per Port VLAN configuration in

4.6.8.2 VLAN Trunking between two 802.1Q aware switches

The most cases are used for "Uplink" to other switches. VLANs are separated at different switches, but they need to access
with other switches within the same VLAN group. The screen in
Figure 4-6-11
Figure 4-6-11: Check VLAN 2 and 3 Members on VLAN Membership Page
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
appears.
Figure 4-6-12 appears.
123