Step 7: Scanner Mask Setting - Ricoh MP CW2201 Field Service Manual

4. Replacement and Adjustment
[A]: Direction of Paper Feed
[B]: Sub Scan: 5 ±0.5 mm
[C]: Main Scan: 5 ±0.5 mm
3. Touch "SP Mode" at the top of the screen, and then adjust these SPs if a measurement is not within
"Standard".
SP
1-001-001
1-001-002
1-001-003
1-002-001
1-002-002
1-002-003

Step 7: Scanner Mask Setting

Do these SPs to replace the "0" settings done in Step 5.
582
Standard:
5 ±0.5 mm Print Position Adj (Top Edge) - Bypass Feed
Print Position Adj (Top Edge) - Paper Input 1
Print Position Adj (Top Edge) - Paper Input 2
Print Position Adj (Left Edge) - Bypass Feed
Print Position Adj (Left Edge) - Paper Input 1
Print Position Adj (Left Edge) - Paper Input 2
Comments