Table of Contents
Advertisement
3. SP Mode Tables
7 SSL Disable
[0 to 1/0/1 /step]
0: Uses the RCG certification
1: Does no use the RCG certification
8 RCG Connect Timeout
[1 to 90/30/1 second /step]
9 RCG Write Timeout
[1 to 100/60/1 second /step]
10 RCG Read Timeout
[1 to 100/60/1 second /step]
11 Port 80 Enable
[0 or 1/0/– ]
0: Disabled, 1: Enabled
13 RFU (Remote Frimware Update) Timing
[0 or 1/1/– ]
• 0: RFU is executed whenever update request is received.
• 1: RFU is executed only when the machine is in the sleep mode.
14 RCG Error Cause
[0 to 1/0/1] 0:Normal condition 1:Error
• If "1" is displayed, this means that the authentication from client to server failed when
• To restore normal operation, cycle the machine off/on to return a "0" (normal
21 RCG – C Registed
0: Installation not completed
1: Installation completed
106
the network re-booted.
condition).
Advertisement
Table of Contents
Troubleshooting
