Ricoh MP CW2201 Field Service Manual page 610

5. System Maintenance Reference
Code
57 @Remote is not connected at the
date/time reserved for receiving
the package firmware update
from the network.
58 Update cannot be done due to a
reception route problem.
59 HDD is not mounted.
60 HDD could not be used during the
package firmware update.
61 The module ID for the package
firmware update is incorrect.
62 The configuration of the package
firmware update files is incorrect.
63 Reception fails due to the power
off at the reserved date/time of
the remote firmware update from
the network.
64 Reception fails due to the power
off at the reserved date/time of
the package firmware update
from the network.
65 Reception fails due to the status
error of the machine at the
reserved date/time of the remote
firmware update from the network.
66 Reception failed due to the status
error of the machine at the
reserved date/time of the
package firmware update from
the network.
604
Contents Solutions
• Check the @Remote connection.
• Check the @Remote connection.
• Check the HDD connection.
• Try again.
• Replace the HDD if the download fails
again.
• Prepare the correct package files.
• Prepare the correct package files.
• Update is to be done automatically when
the next reception time has elapsed.
• Reset the reservation date/time for the
remote update.
• Update is to be done automatically when
the next reception time has elapsed.
• Reset the reservation date/time for the
remote update.