Ricoh MP CW2201 Field Service Manual page 699

04 Communication line error
The supplied voltage is not sufficient due to the defective communication line or
defective connection.
The authentication for the Cumin-M fails failed at a dial up connection due to one
or more of the following:
• Incorrect SP settings
• Disconnected telephone line
• Disconnected modem board
• Disconnected wireless LAN card
• Check and set the correct user name (SP5-816-156) and password
(SP5-816-157).
05 No modem board
Modem board is not installed even though the setting at Cumin-M (During the
operation)
The authentication for the Cumin-M fails failed at a dial up connection due to one
or more of the following:
• Incorrect SP settings
• Disconnected telephone line
• Disconnected modem board
• Disconnected wireless LAN card
• Check and set the correct user name (SP5-816-156) and password
(SP5-816-157).
13 Modem board error 1
Modem board not installed or the board is defective.
• Install the modem board.
• Check correct setting value for modem driver (SP5-816-160,
SP5-816-165 to 171, SP5-816-188 and 189).
• Replace the modem board.
SC600: Communication
693