Scan Settings When Using Twain Scanner; Setting Original Orientation On The Twain Scanner - Ricoh 917F Operating Instructions Manual

6. Scanning Originals with the Network TWAIN Scanner

Scan Settings When Using TWAIN Scanner

This section explains how to specify original orientation and scan setting for a bundle of mixed size originals
when using the TWAIN scanner.

Setting Original Orientation on the TWAIN Scanner

This section explains how to correctly display the top/bottom orientation of scanned originals on a client
computer screen.
To correctly display the top/bottom orientation of the scanned original on a client computer, the placement
of the original and the settings made in the Scanner Control dialog box must match.
1. Open the Scanner Control dialog box.
For details about how to open the Scanner Control dialog box, see "Basic Network TWAIN Scanner
Procedure".
2. In the [Original Scan Method:] list, select the place where the original is placed.
6
3. If you placed an original on exposure glass, in the [Orig.Orientn.:] list, select [
or [
4. In the [Orientation:] list, select [
[
5. If you placed originals on ARDF, select [1 Sided], [2 Sided(Top to Top)], or [2 Sided(Top to
Bottom)] in the [Scan Settings:] list.
• p.132 "Basic Network TWAIN Scanner Procedure"
Placing originals
The following table shows the relationship between the original orientation and the Scanner Control dialog
box settings:
Exposure Glass
top edge touches top left of exposure glass
134
].
/ ], or [
Original Orientation
/ ], [
/ ].
TWAIN Scanner Control Dialog Box Key
]
/ ],