Ricoh MP CW2201 Field Service Manual page 310

Hide thumbs Also See for MP CW2201:

Table of Contents

4. Replacement and Adjustment

• To attach the CIS unit, fully insert the frames on the both sides to the slits of the main unit and

fasten it with screws.

• Check that there is no dust or dirt on the CIS lenses or exposure glass.

5. At the rear, pull each FFC through the slot using the Allen key.

6. Connect the FFCs to the SIB. (

• Each FFC connector slot of the SIB is marked with the number of CIS element that it connects

to. The example below shows "CIS 5".

• Connect the FFC with the same number as the number of the SIB connector to the SIB.

Troubleshooting