Carriage Unit; Before You Begin - Ricoh MP CW2201 Field Service Manual

Hide thumbs Also See for MP CW2201:

Table of Contents

4. Replacement and Adjustment

Carriage Unit

• Set the main power switch to OFF and disconnect the power plug from the power outlet before

performing the procedure below. Working with power supplied may cause electrical shock or

• Always follow instructions and work carefully to avoid spilling ink from the ink tubes and the tops of

the ink sub tanks.

• If ink spills onto a printed circuit board at the base of the FFC, the print head unit will become

unusable and require replacement.

1. Horizontal line on both the left and right margins.

• The width of the left and right margins must be the same.

• The width of the left and right margins must be in the range: 2.5 to 3.0 mm.

2. If the left and right margins are the same size and within the range 2.5 to 3.0 mm, no adjustment is

If the margins need adjustment, do the following steps.