Ricoh MP CW2201 Field Service Manual page 334

Hide thumbs Also See for MP CW2201:

Table of Contents

4. Replacement and Adjustment

4. To install the guide plate of the roll unit 2, make sure that the hooks of the guide plate are placed

correctly on the left and right pins.

5. Make sure that the roll unit harness are tight against the bottom of the PCB box.

• During bypass paper feed, the trailing edge of the paper comes out of the machine briefly

and then feeds back into the machine. If the harnesses of the roll unit are hanging down, they

could interfere with paper in the bypass paper feed path.

Troubleshooting