Table of Contents
Advertisement
4. Replacement and Adjustment
9.
Connect the FFCs (front side) to the upper connectors at the lower part of the HRB. (
x3)
• If the FFC is pulled after connecting to the HRB, it may be hooked into the OCFS actuator.
Then the FFC becomes longer than the required length to the connector and the deflected part
may push the OCFS actuator. In this case, release the FFC and release the hooked part. Then
connect it to the HRB again.
458
Not hooked
1: Filler
2: FFC
3: HRB
Hooked
Advertisement
Table of Contents
Troubleshooting
