Step 8: Erase Margins; Step 9: Scanner Registration - Ricoh MP CW2201 Field Service Manual

SP Set To:
4-012-005
4-012-006
4-012-700
4-012-008

Step 8: Erase Margins

Do these SPs to replace the settings done in Step 6.
SP Set To:
2-103-001
2-103-002
2-103-003
2-103-004

Step 9: Scanner Registration

1. Use the A1 LEF Test Chart to make a 1:1 copy on plain A1 LEF paper.
2. On the copy, measure the gap between the chart image at the leading edge and at the left edge.
3. Adjust these SPs if necessary.
SP Standard
4-010-001 ±3 mm
4-010-002 ±2.8 mm
4-011 ±2.8 mm
1.5 Scanner Edge Margin - DF: Leading Edge
Scanner Edge Margin - DF: Trailing Edge
Scanner Edge Margin - DF: Left Edge
0.5 Scanner Edge Margin - DF: Right Edge
2 Printing Erase Margin – Leading Edge
Printing Erase Margin – Trailing Edge
Printing Erase Margin – Left Edge
0.5 Printing Erase Margin – Right Edge
Scanner Sub Scan - Leading Edge Reg Adjustment
Scanner Main Scan - Trailing Edge Reg Adjustment
Scanner Main Scan - Registration
Comments
Comments
Comments
Special Adjustments
583