Ecm (Error Correction Mode); User Parameters - Ricoh Aficio 3224C Operating Instructions Manual

Administrator Setting

ECM (Error Correction Mode)

If part of a transmission fails because
of a line problem, the lost data is auto-
matically resent. For this function to
work, the other machine must have
ECM. You can turn this function on or
off through the following procedure.
Limitation
❒ This function is not available with
Internet Fax.
Note
❒ If you turn ECM off, you cannot
use the following functions:
• JBIG Transmission
• Super G3 Communication
A A A A
Press the { { { { User Tools/Counter} } } } key.

User Parameters

User Parameters allow you to customize various settings to suit your needs.
9
To change function settings, set the User Parameter Switches.
❖ ❖ ❖ ❖ Switches and Bits
Each User Parameter has a set of switches, and each of the switches consist of
eight bits, whose values are "0"or "1". The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between "0"and"1".
Switch
02
164
0 0 1
↓ ↓ ↓
7 6 5
B B B B
Press [Facsimile Features].
C C C C
Press [Administrator Tools].
D D D D
Press [ECM].
E E E E
Select [On] or [Off], and then press
[OK].
Note
❒ To cancel this setting, press
[Cancel]. The display returns to
that of step
F F F F
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.
1 1 0
↓ ↓ ↓
4 3 2
D
.
1 1
↓ ↓
1 0