If Memory Runs Out While Storing An Original; Ecm (Error Correction Mode); Immediate Transmission - Ricoh Aficio 1027 Facsimile Reference Manual

If memory runs out while storing an original

If you run out of memory while storing an original (free space reaches 0%), the
"
Memory is full. Scanning will be stopped and only scanned page(s)
" message appears. Press [Exit] to transmit stored pages only.
will be stored.
Note
❒ When this happens, only the scanned pages are sent. If you want to delete the
scanned pages and cancel transmission in this case, contact your service rep-
resentative.

ECM (Error Correction Mode)

If part of a transmission fails because of a line problem, the lost data is automat-
ically resent. You can turn this function on or off with the User Parameters
(switch 01, bit 0).
Important
❒ For this function to work, the other machine must have ECM.
❒ This function is not available with Internet Fax.
Note
❒ If you turn ECM off, you cannot use the following functions:
• JBIG Transmission
• Super G3 Communication

Immediate Transmission

Immediate Transmission is possible with standard fax transmission and IP-Fax
transmission.
Important
❒ Internet Fax is executed in only Memory Transmission that starts transmis-
sion automatically after storing documents in memory. If you specify Imme-
diate Transmission in Internet Fax, the "
memory transmission.
and then switch to Memory Transmission.
❒ Group cannot be used for Immediate Transmission. You cannot send the
same document to multiple destinations (broadcasting). If you specify a
group, the "
Try again after switching to memory transmission.
message appears. When this happens, press [Exit], and then switch to Memo-
ry Transmission.
Try again after switching to
" message appears. When this happens, press [Exit],
Transmission Modes
"
19
1