Quitting The Forwarding Function; Forwarding Mark - Ricoh Aficio 3224C Operating Instructions Manual

Administrator Setting
F F F F
Specify an End Receiver using the
destination list, and then press
[OK].
The receiver name is shown to the
right of [Receiver].
Note
❒ Press the button on the right of
the display to switch the desti-
nation between fax number, e-
mail address, IP-Fax destina-
tion, and folder.
❒ Set a folder destination in Sys-
tem Initial Setting/Administra-
t o r
Setting/Register/Change/De-
lete Address Book. "Registering
Folders", General Settings Guide.
❒ If you have specified a folder for
forwarding, you can specify the
file format used for forwarding.
9
See p.164 "User Parameters"
(switch 21, bit 3).
❒ If you make a mistake, press
[Clear] before pressing [OK], and
then try again.
G G G G
Press [OK].
H H H H
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.
162

Quitting the forwarding function

A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Administrator Tools].
D D D D
Press [Forwarding].
E E E E
Press [Off], and then press [OK].
F F F F
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.

Forwarding Mark

You can print a Forwarding Mark on
the receiver's messages that have
been forwarded.
The receiver can distinguish between
forwarded messages and usual recep-
tions.
Note
❒ You can specify whether or not to
print a Forwarding Mark in the
User Parameters. See p.164 "User
Parameters" (switch 02, bit 0).