Transfer Report - Ricoh Aficio 3224C Operating Instructions Manual

Transfer Report

For the Requesting Party to be able to
receive Transfer Result Reports from
the Transfer Station, the Requesting
Party must program the number of
the telephone line in connection on
their own machine. See p.52 "Trans-
fer Request".
Be sure to insert a pause after the area
code.
For example, if you are in the United
States and your fax number is 212-
1234567, program the following:
• 1212-1234567
You can program the fax number for
the G3 line.
Limitation
❒ You cannot program or edit a
Transfer Report when using a line
(during communication). Program
or edit after communication.
Note
❒ You cannot use Transfer Request if
the telephone number of their ma-
chine is not programmed into that
machine.
❒ Up to 16 digits are available for G3.
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Administrator Tools].
D D D D
Press [Transfer Report].
Using Administrator Settings
E E E E
Specify the fax number.
Programming a G3 Fax Number
A Press [G3 Fax No. (Dir.)].
B Enter your facsimile number
using the number keys and
{ { { { Pause/Redial} } } } key, and then
press [OK].
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key.
F F F F
Press [Exit].
G G G G
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.
9
189