Ricoh Aficio 3224C Operating Instructions Manual page 217

Limitation
❒ There may be a difference in the size of the image when it is printed at the des-
tination.
❒ If you place an original larger than A3, 11"×17" on the exposure glass, only an
A3, 11"×17" area is scanned.
Note
❒ Even if an original is correctly placed on the exposure glass or in the ADF, a
margin of 3mm (0.1") around each edge of the original may not be sent.
❒ If the receiver uses paper of a smaller width than the original, the image will
be reduced to fit that paper. See p.74 "Auto Reduce".
❒ The machine detects paper sizes in the following ways:
• When you place an original in the ADF, an original wider than about
268mm (10.5") is scanned as A3, 11" × 17" size.
An original narrower than about 235mm (9.2") will be sent as 8
" × 14" size, and an original narrower than about 268mm (10.5") is
1
8 /
2
scanned as B4 JIS.
Originals up to 1,200mm (47.2") in length can be scanned.
• Refer to the table below for sizes the machine can detect when you place
an original on the exposure glass. Because the machine scans non-standard
size documents in a standard size, part of the image may be truncated de-
pending on the length of the document. For details about how to set non-
standard size documents, see p.15 "Setting a Scan Area", Facsimile Refer-
ence <Basic Features>.
❖ ❖ ❖ ❖ Metric Version
–approx. 245mm approx. 245mm–
–approx.
245mm
approx.
245mm–
approx.
270mm
approx.
270mm–
approx. 270mm
×
B5 JISL
B5 JISK B4 JISL
A4K A3L
*1
Length
approx. 270mm–
approx. 318mm
A4L
B4 JISL
A3L
Specifications
" × 11" or
1
/
2
approx. 318mm–
FL
B4 JISL
A3L
207
11