Transmission
If memory runs out while storing an original
If you run out of memory while storing an original (free space reaches 0%), the
"
Memory is full. Scanning will be stopped and only scanned page(s)
1
will be stored.
Note
❒ When this happens, only the scanned pages are sent. If you want to delete the
scanned pages and cancel transmission in this case, contact your service rep-
resentative.
ECM (Error Correction Mode)
If part of a transmission fails because of a line problem, the lost data is automat-
ically resent.
Important
❒ For this function to work, the other machine must have ECM.
❒ This function is not available with Internet Fax.
Immediate Transmission
Immediate Transmission is possible with standard fax transmission and IP-Fax
transmission.
Important
❒ Internet Fax is executed in only Memory Transmission that starts transmis-
sion automatically after storing documents in memory.
• If you specify an Internet Fax destination after selecting Immediate Trans-
mission, the mode switches to Memory Transmission.
• If you try to select Immediate Transmission after specifying an Internet Fax
destination, the "
on immediate transmission is already selected.
When this happens, press [Exit].
❒ Group cannot be used for Immediate Transmission. You cannot send the
same document to multiple destinations (broadcasting).
• If you specify a second destination or a group after selecting Immediate
Transmission, the mode switches to Memory Transmission.
• If you try to select Immediate Transmission after specifying multiple des-
tinations or a group, the "
specified on immediate transmission is already selected.
message appears. When this happens, press [Exit].
20
" message appears. Press [Exit] to transmit stored pages only.
Dest. and functions that could not be specified
Dest. and functions that could not be
" message appears.
"