Jbig Reception; Auto Fax Reception Power-Up - Ricoh Aficio 3224C Operating Instructions Manual

Reception Features
- Specifying E-mail Transfer - - -
The originator can request transfer of e-mail sent to another fax machine by spec-
ifying the e-mail address as follows:
❖ ❖ ❖ ❖ Fax Number
fax=destination fax number@host name of this machine. domain name
Example: to transfer to fax number 212-123-4567, specify:
fax=2121234567@abc.company.com
❖ ❖ ❖ ❖ Quick Dial Destination
fax=#registration number of 5 digits or less@host name of this machine.do-
main name
Example: to transfer to the destination number 00001:
fax=#00001@abc.company.com
❖ ❖ ❖ ❖ Group Destination
5
fax=#**registration number of 5 digits or less@host name of this machine.do-
main name
Example: to transfer to the destination programmed under Group number 04:
fax=#**04@abc.company.com

JBIG Reception

If you use JBIG (Joint Bi-level Image
Experts Group) compression, you can
send photographic originals faster
than with other methods of compres-
sion. It allows you to receive messag-
es sent in the JBIG format through
JBIG Transmission.
Limitation
❒ You can only use this function
with telephone line.
❒ If ECM is turned off, JBIG Recep-
tion is unavailable. See p.164
"ECM (Error Correction Mode)".
94

Auto Fax Reception Power-up

This machine can be set to shut down
automatically if no one has used it for a
while. In these situations, even though
the operation switch is off, the machine
can still receive incoming messages as
long as the main power switch is on.
Important
❒ Reception is not possible if both
the operation switch and main
power switch are turned off.
Note
❒ You can set whether messages are
printed as soon as they are re-
ceived (Immediate Reception)
with the User Parameters. See
p.164 "User Parameters" (switch
14, bit 0).
❒ You can also have fax messages re-
ceived by Memo ry Reception
(Substitute Reception) printed af-
ter the machine is turned on.