If Memory Runs Out While Storing An Original; Ecm (Error Correction Mode); Immediate Transmission - Ricoh MP 161 Function Manual

If memory runs out while storing an original

If you run out of memory while storing an original (free space reaches 0%), the
"
Memory is full. Scanning will be stopped and only scanned page(s)
" message appears. Press [Exit] to transmit stored pages only.
will be stored.
Note
❒ When this happens, only the scanned pages are sent. If you want to delete the scanned
pages and cancel transmission in this case, contact your service representative.

ECM (Error Correction Mode)

If part of a transmission fails because of a line problem, the lost data is automat-
ically resent.
Important
❒ For this function to work, the other machine must have ECM.
❒ This function is not available with Internet Fax.

Immediate Transmission

Immediate Transmission is possible with standard fax transmission and IP-Fax
transmission.
Important
❒ Internet Fax is executed in only Memory Transmission that starts transmis-
sion automatically after storing documents in memory. If you specify Imme-
diate Transmission in Internet Fax, the "
memory transmission.
and then switch to Memory Transmission.
❒ Group cannot be used for Immediate Transmission. You cannot send the
same document to multiple destinations (broadcasting). If you specify a
group, the "
Try again after switching to memory transmission.
message appears. When this happens, press [Exit], and then switch to Memo-
ry Transmission.
Try again after switching to
" message appears. When this happens, press [Exit],
Transmission Modes
"
21
1