2Nd Color Choice; When There Is No Paper Of The Correct Size - Ricoh Aficio 3224C Operating Instructions Manual

2nd Color Choice

If this function is specified, the ma-
chine can print with 2nd Color when
the machine has run out of default
toner. It is useful that the 2nd toner
use as a reserve of toner.
Limitation
❒ The color specified for FAX Print
Color can not be used as a 2nd Col-
or Choice.
Note
❒ You can turn this function on and
select the color with Reception
Mode. See p.49 "Reception", Fac-
simile Reference <Basic Features>.
❒ If the machine has run out of 2nd
Color, there is no additional substi-
tution.
When There Is No Paper of the
Correct Size
If there is no paper in your machine
that matches the size of a received
message, the machine will choose a
paper size based on the paper avail-
able. For example, if your machine
1
has 8 / "×11"K and A3L loaded and
2
you receive a A4L size message,
check the A4L column of the follow-
ing table. The paper size at the top has
highest priority. In this case, since
1
8 / "×11"K is given a higher priority
2
than A3L, the message is printed on
1
8 / "×11"K.
2
If only B5 JISL is loaded and you re-
ceive an A3L message, the received
message is stored in memory and not
printed.
❖ ❖ ❖ ❖ Priority Table
Page reduction
Reduction in Sub-
scan Direction
Page Separation
Threshold
Width or Length Pri-
ority
• KK and LL indicate that the
message is split over two pages of
paper with the orientation and size
shown.
Note
❒ Paper placed in the bypass tray is
not usually selected for printing a
received message. However, you
can use this tray if you select the
bypass tray as the main paper tray
using Reception with Specified
Senders. See p.169 "Special Send-
ers to Treat Differently".
❒ Widths that this machine can re-
ceive are A4, B4 JIS, and A3. Any
messages narrower than A4 are
sent as A4 width with the length
unchanged.
Printing Options
Disabled
Enabled
20mm (0.79")
Width
5
101