Omron NT31C Reference Manual page 68

Areas for Control/Notification
Reference: The updated memory table number is written only when the memory table con-
15 14 13 12 11
0
strobe flag is turned ON. (After turning ON, the flag will automatically turn OFF.)
(Refer to page 57.)
12345678
Updated Memory Table and PT Status of The PT Status Notify Area
15 14 13 12 11 10 9
Word
m Memory table number (4-digit BCD or hexadecimal)
m + 1 – 0 –
BCD
0001 to 1999
tents are changed by operation at the PT. The memory table number is not writ-
ten when the contents of the numeral memory table are changed with the mathe-
matical function.
PT Status Notify Bits
The PT status notify bits have the functions shown below.
10 9 8 7 6 5 4 3
0 0
PT Operation Status (Bit 15)
When the PT is in RUN mode, this bit is set to 1. In other modes, and when the
System Menu screen is displayed, it is set to 0 (OFF). When this bit is set to 0
(OFF), the allocated bits and words are neither read or written.
While the PT is in RUN mode, 1 (ON) is periodically written to this bit. In order to
check whether the PT is operating normally or not, write 0 (OFF) to this bit, then
read it 30 seconds later. If the setting for the bit is 1 (ON), the PT is judged to be
running, and if it is 0 (OFF), the PT is judged to be stopped.
PT
Numeral memory table 1
12345678
7 8 9
Table number
4 5 6
1 2 3
Numeral setting
0 .
strobe flag
8 7 6 5
– 0 0 – – –
String setting strobe flag
Numeral setting strobe flag
Hexadecimal
0000 to 07CF Memory table numbers 0 to 1,999 max.
2 1 0 Bit
0
0 0
Notified Information
15 PT operation status
13 Battery status
12 Screen switch strobe
11 Numeral setting strobe flag
10 Character string setting strobe flag
7 Printer operating status
6 Backlight status
5 grobal window status
4 Local window1 status
3 Local window2 status
Section
PC
PT status notify area
Content update memory table
PT status
Allocated word (numeral memory table 1)
12345678 →
5 6 7 8 First
1 2 3 4
First + 1
4 3 2 1 0 Bit
Updated
memory table
– – 0 0 0 PT status
Numbers
1 (ON) 0 (OFF)
Run Stop
Low Normal
Printing Stopped
Off Lit/Flashing
Open Close
Open Close
Open Close
2-2
57