Omron NT31C Reference Manual page 444

Compatibility with Screen Data of Other PT Models
Relationship between System Program and Hardware
Here, relationship between system program and hardware is described.
NT31/NT31C System Programs
NT31/NT31C have following models.
NT31-ST121j-E Conventional product
NT31C-ST141j-E
NT31-ST121j-EV1 Version upgrade model of the products above
NT31C-ST141j-EV1
NT31-ST121j-EV2 Version upgrade model of the products above
NT31C-ST141j-EV2
System programs indicated below are installed for the models shown above in the default state. Also, system pro-
grams are supplied with the Support Tool as follows.
• System programs for NT31-ST121j-E/NT31C-ST141j-E: System Program Ver. 1.0j
(System programs supplied with NT-ZJ3AT1-EV2/ZJCAT1-EV2)
• System programs for NT31-ST121j-EV1/NT31C-ST141j-EV1: System Program Ver. 2.0j or 2.1j
(System programs supplied with NT-ZJ3AT1-EV3/ZJCAT1-EV3)
• System programs for NT31-ST121j-EV2/NT31C-ST141j-EV2: System Program Ver. 3.0j
(System programs supplied with NT-ZJCAT1-EV4)
These system programs have mutual compatibility, therefore, they can be installed and used for
NT31-ST121j-E/NT31C-ST141j-E/NT31-ST121j-EV1/NT31C-ST141j-EV1/NT31-ST121j-EV2/NT31C-
ST141j-EV2 each.
However, there will be a limitation on function depending on the combination. Refer to the table on page 438.
NT631/NT631C System Programs
NT631/NT631C have following models.
NT631-ST211j-E
NT631C-ST141j-E
NT631C-ST151j-E
NT631-ST211j-EV1
NT631C-ST141j-EV1
NT631C-ST151j-EV1
NT631-ST211j-EV2
NT631C-ST141j-EV2
NT631C-ST151j-EV2
System programs indicated below are installed for the models shown above in the default state. Also, system pro-
grams are supplied with the Support Tool as follows.
• System programs for NT631-ST211j-E/NT631C-ST141j-E/NT631C-ST151j-E:
System Program Ver. 1.0j (System programs supplied with NT-ZJ3AT1-EV2/ZJCAT1-EV2)
• System programs for NT631-ST211j-EV1/NT631C-ST141j-EV1/NT631C-ST151j-EV1:
System Program Ver. 2.0j or 2.1j (System programs supplied with NT-ZJ3AT1-EV3/ZJCAT1-EV3)
• System programs for NT631-ST211j-EV2/NT631C-ST141j-EV2/NT631C-ST151j-EV2:
System Program Ver. 3.0j (System programs supplied with NT-ZJCAT1-EV4)
These system programs have mutual compatibility, therefore, they can be installed and used for the
NT631-ST211j-E, NT631C-ST141j-E, NT631C-ST151j-E, NT631-ST211j-EV1, NT631C-ST141j-EV1,
NT631C-ST151j-EV1, NT631-ST211j-EV2, NT631C-ST141j-EV2, NT631C-ST151j-EV2.
However, there will be a limitation on function depending on the combination. Refer to the table on page 438.
g
g
Conventional product
Version upgrade model of the products above g
Version upgrade model of the products above g
Appendix B
437