Omron NT31C Reference Manual page 260

Special Functions
Reference: The PT automatically distinguishes the model of PC that is connected and auto-
Most of Programming Console functions are possible, with the exception of re-
cording (storing) ladder programs on cassette tape and replaying (reading)
them.
For details on the system configuration for using the Programming Console
function, the method for connection to a PC, and how to use the Programming
Console function, refer to Programming Console Function in section 6 of the
Setup Manual .
Programming Console function can be used even when the PC is in running
mode.
Note, however the PT will stop operating at the same time the Programming
Console function is applied. (RUN LED goes OFF)
Pressing a Quit touch switch on the Programming Console function screen re-
turns to a screen displayed just before the Programming Console function was
called.
matically displays the Programming Console function screen which conforms to
the PC.
Section 2-16
249