Omron NT31C Reference Manual page 139

Touch Switches
Reference:
Reference:
128
The window is changed to the frame display only as follows, with the
mark at the center of it.
Window moving key
move
3. Press the touch panel of the PT at the moving destination.
Window is moved so that the center position of the window comes to the
pressed position.
This time, Display Position of the corresponding window area is changed.
Press the moving destination
When the window is in a moving status (while
of the window), the following points differ from the normal running status.
• The elements which use the touch panel as an input do not function re-
gardless of the screens (base/window) they are registered on. Only the
specification of the window moving destination is possible.
• Switching to the system menu is not possible.
• Screen switching or window controlling due to the change in bit memory
table, PT status control area or window control area is not possible.
• Screen saver function does not work.
• There is no time-limit for a window moving status. It will not return to the
normal running status until the moving destination is specified.
S Window moves by a minimum touch switch size (20 20).
S Be sure to complete all the window moving operation when in the window mov-
ing status, since its behavior differs from the one when in the normal running
status.
Screen Print Key Function
This function allows starting and stopping of the printing of a hard copy of the
currently displayed screen (screen image) at a printer connected to the PT.
S The PT continues operating during printing.
S The printer type and printing method (color/monochrome (8 grayscale levels))
is determined by memory switch setting at the PT.
S A hard copy of the screen can also be printed by operation with the PT status
control bits. In this case also, printing can be stopped part way through by
pressing a touch switch.
The attributes for screen printing are as follows.
Settings
Print Screen
Printing of
Display Screen
mark is displayed at the center
Set whether the touch switch is to start printing or stop
printing.
Start/Abort
Section 2-7
move