Omron NT31C Reference Manual page 152

Character String Display
Reference: The 32 dot high-definition font is not displayed for the following models. (16 16
Enlarged Display
Character strings can be displayed at the following scales.
1 1 (Equal) 2 1 (Wide)
3 3
With ISO 8859-1 font type, the character strings of 2 2 or larger scale are auto-
matically displayed in 32 dot high-definition font. However, the marks inserted
into a string are always displayed in 16 16 dot font.
dot font is used.)
• NT31-ST121j-E
• NT31C-ST141j-E
• NT631-ST211j-E
• NT631C-ST141j-E
• NT631C-ST151j-E
Smoothing
Characters enlarged to a scale of 2 2 or greater can be displayed with the out-
line automatically smoothed. This function is called smoothing.
Note that smoothing cannot be used for marks.
With smoothing
Without smoothing
Smoothing is not performed for high-definition font.
Discrepancy Between Length and Number of Characters
If the actual number of characters of the data in the character string memory
table is greater than the number specified for Length, the surplus part is ignored.
If the actual number of characters of the data in the character string memory
table is less than the number specified for Length, the size of the field in which
the character string is displayed is still determined by the settings for Length and
Scale. In such cases the character is displayed left-justified, with spaces filling
the superfluous part. Therefore if the contents of the numeral memory table
change to fewer characters, the characters of the previous data do not remain
displayed at the right side.
1 2 (High) 2 2
4 4
Section 2-9
8 8
141